HONEYSUCKLE BEVEL QUARTZ BANGER - 45° DEGREE | BL

Check this list to see if our Honeysuckle Bevel 45° is the right fit for your setup.

• Your rig has an angled joint: We made this banger for rigs with a joint set at a 45-degree angle.
• You want a better carb cap seal: The beveled edge provides a tight seal, especially with bubble and directional caps.
• Durability is a priority: Its seamless full-weld design is much stronger than typical bangers and resists heat stress.
• You like standard bucket sizes: The 25mm outer diameter is a great size for most dabs.
• You have a rig with a female joint: This banger comes in 14mm or 18mm male sizes to fit common rigs.
• You value quick heat-up times: The 2.5mm walls heat quickly but still hold heat well for a full session.

Every detail of our Honeysuckle Bevel helps its performance. This table explains what each spec means for you.

Choosing the right joint is key for a good fit. We offer this banger in the two most common dab rig sizes. Measure your rig's joint to see which one you need.

• 14mm Male: Pick this size if your rig has a 14mm female joint. It's the most common size.
• 18mm Male: Pick this size if your rig has a larger 18mm female joint.

Both sizes have a frosted joint for a secure, airtight connection.

Three key design choices help our Honeysuckle Bevel Banger perform so well.

Why Choose A Beveled Edge Over A Flat Top?

A beveled edge is angled so a bubble or directional carb cap can sit securely inside the rim, creating a near-perfect seal. This stops vapor from escaping and directs airflow right onto your concentrates. Flat tops can leak air, wasting vapor and material.

What Is The Benefit Of A Seamless Full Weld?

With a seamless full weld, the bucket and neck are fused into one solid piece of quartz. This makes the joint much stronger and less likely to break from drops or heat. It also helps heat travel more efficiently from the neck to the bucket.

When Do You Need A 45-Degree Banger?

You need a 45-degree banger if your dab rig has an angled joint. A 90-degree banger would tilt, heating unevenly and spilling your concentrate. A 45-degree banger keeps the dabbing surface flat for the best results.

Follow these steps to get the best performance and longest life from your new Honeysuckle Banger.

1. Attach to Rig: Fit the banger securely into the female joint on your angled rig.
2. Heat the Banger: Use a torch to heat the bottom and sides of the bucket evenly for about 20-30 seconds. Do not heat the joint.
3. Cool Down: Wait 40-60 seconds for the banger to cool. The right temperature depends on your dabs and preference.
4. Apply Concentrate: Use a dab tool to place your material on the bucket floor.
5. Cap and Inhale: Place a carb cap on the top and inhale slowly from the rig's mouthpiece.
6. Clean Immediately: After your session, use a cotton swab to wipe out any residue while the banger is still warm. This prevents buildup.

Our Honeysuckle 45° is a specialized banger. Here is how it compares to other options in a similar price range.

Proper care helps your quartz banger last a long time and provide pure flavor. The most important step is to clean it after every use. While the banger is still warm, use a dry cotton swab to wipe up any leftover oil. For stubborn spots, use a swab with isopropyl alcohol.

To avoid cracks, do not expose the banger to sudden temperature changes, like running it under cold water when hot. For a deep clean, soak the banger in an isopropyl solution for several hours. Then, rinse it with warm water and let it dry completely before your next use. This prevents blackening and buildup.

A great banger works even better with the right accessories. Complete your setup with these essentials.

• Shop all Quartz Bangers & Dab Nails
• Find a Compatible Carb Cap
• Browse Dab Rigs & Water Pipes